Products
- Home
- Products
- Product/technological information
- Main Lubricants
Product/technological information
16. Main Lubricants
Main Oil Brands and Performances
| Code | Brand | Manufacturer | Base oil | Flash point(℃) | Pour point(℃) | Kinematic viscosity(mm²/s) | Specific gravity | Operating temperature(℃) | Features and applications |
|---|---|---|---|---|---|---|---|---|---|
| AF2 | AeroShell Fluid 12 (standard oil) | Shell Lubricants Japan | Diester | 220 | -60 or less | 11000(-54℃),8.2(54℃) | 0.93 | -54 to +135 | Low volatility, for aircraft gyroscopes and electronic devices |
| WL2 | WINSOR L 245 X | Fuchs Lubritech | Diester | 227 | -65 | 13.02(40℃) | 0.92 | -50 to +80 | Oxidation-resistant and wear-resistant, for electric motors and measuring instruments |
| KAZ | Krytox 143AZ | Chemours | Fluorinated | ― | -55 | 22.8(40℃),4.1(100℃) | 1.91 | -57 to +149 | For home appliances, office equipment and aerospace applications, inert |
| PD8 | Isoflex PDP38 | Klüber Lubrication | Diester | 200 | -70 | 12.0(40℃),3.2(100℃) | 0.92 | -65 to +100 | Low temperature, for home appliances and precision equipment |
Main Grease Brands and Performances
| Code | Brand | Manufacturer | Base oil | Thickener | Dropping point(℃) | Worked penetration (25℃, 60 times) |
Base oil kinematic viscosity(mm²/s) | Specific gravity | Color | Operating temperature (℃) |
Features and applications |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SRL | Multemp SRL (standard grease) | Kyodo Yushi | Polyol Ester, Diester | Lithium | 192 | 250 | 24.6(40℃), 4.9(100℃) |
0.97 | Light tan | -50 to +150 | Low noise, long life, and low torque |
| PS2 | Multemp PS No.2 | Diester, Mineral | Lithium | 190 | 275 | 15.3(40℃), 3.9(100℃) |
0.91 | White peach | -50 to +130 | Low temperature, low torque, and low noise | |
| SBM | Multemp SB-M | Synthetic hydrocarbon | Diurea | 260 | 220 | 47.6(40℃) | 0.85 | Light tan | -40 to +200 | Higher-temperature-resistant and longer-life version of Multemp SRL | |
| RMS | Raremax Super | Mineral, Synthetic hydrocarbon | Diurea | 255 | 260 | 10.5(100℃) | 0.90 | Light tan | -40 to +180 | High temperature, low noise, oxidation-resistant, and corrosion-resistant, for motors | |
| AV2 | Shell Alvania Grease S2 | Shell Lubricants Japan | Mineral | Lithium | 181 | 283 | 131(40℃), 12.2(100℃) |
0.90 | Amber | -25 to +120 | General multipurpose |
| AV3 | Shell Alvania Grease S3 | Mineral | Lithium | 182 | 242 | 131(40℃), 12.2(100℃) |
0.90 | Amber | -20 to +135 | General multipurpose | |
| AG3 | AeroShell Grease 33 | Synthetic hydrocarbon, Ester | Lithium | 216 | 297 | 14.2(40℃), 3.4(100℃) |
1.00 | Green | -73 to +121 | Oxidation-resistant, corrosion-resistant and load-resistant | |
| 2VQ | Shell Gadus S2 V100Q 2 | Mineral | Lithium hydroxystearate | 180 | 280 | 100 (40℃), 11(100℃) |
0.90 | Beige | Up to +135 | Low noise, for electric motors | |
| 2V3 | Shell Gadus S2 V100 3 | Mineral | Lithium hydroxystearate | 180 | 235 | 100 (40℃), 11(100℃) |
0.90 | Beige | Up to +130 | Multipurpose | |
| M3L | Molykote 33L Grease | DuPont Toray Specialty Materials | Silicone | Lithium | 210 | 320 | 100(25℃) | 1.00 | White | -73 to +180 | Oxidation-resistant, wide temperature range, low temperature, and water-resistant |
| M3M | Molykote 33M Grease | Silicone | Lithium | 210 | 280 | 100(25℃) | 1.00 | White | -73 to +180 | Oxidation-resistant, wide temperature range, low temperature, and water-resistant | |
| M4M | Molykote 44M Grease | Silicone | Lithium | 204 | 260 | 125(25℃) | 1.00 | White | -40 to +200 | Low evaporation, oxidation-resistant, wide temperature range, low temperature, and water-resistant | |
| G45 | Molykote G-4500 FM Multi-Purpose Synthetic Grease | PAO | Aluminum complex | 270 | 280 | 100(40℃), 14.4(100℃) |
0.84 | White | -40 to +150 | Wide temperature range, for food machinery (NSF H1) | |
| RL2 | Cassida Grease RLS2 | Fuchs Lubritech | Synthetic | Aluminum complex | 240 | 280 | 150(40℃), 18(100℃) |
0.88 | White | -35 to +120 | For food machinery (NSF H1) |
| GHY | Asonic GHY 72 | Klüber Lubrication | Ester | Polyurea | 250 | 265 | 72(40℃), 9.5(100℃) |
0.95 | Brown-yellow | -40 to +180 | High temperature, low noise, and high speed |
| GLY | Asonic GLY 32 | Synthetic hydrocarbon, Ester | Lithium | 190 | 280 | 25(40℃), 5(100℃) |
0.94 | Light brown | -50 to +140 | Low temperature, low torque, low noise, and high speed | |
| HQ7 | Asonic HQ 72-102 | Ester | Polyurea | 240 | 265 | 100(40℃), 12(100℃) |
0.97 | Light brown | -40 to +180 | High temperature, low noise, and water-resistant | |
| B52 | Isoflex TOPAS NB 52 | Synthetic hydrocarbon | Barium | 240 | 280 | 30(40℃), 5.9(100℃) |
0.96 | Light brown | -50 to +120 | Load-resistant, heat-resistant, water-resistant, high speed, and supports electrical contact | |
| L8A | Isoflex LDS 18 Special A | Ester, Mineral | Lithium | 190 | 280 | 15.0(40℃), 3.5(100℃) |
0.88 | Yellow | -50 to +120 | Low temperature, low torque, biodegradable, and high speed(dmn100×104) | |
| SL8 | Isoflex Super LDS 18-R | Ester, Mineral | Lithium | 190 | 280 | 15.0(40℃), 3.5(100℃) |
0.90 | Yellow | -50 to +120 | Low temperature, low torque, and high speed(dmn100×104) | |
| NB5 | Isoflex NBU 15 | Synthetic hydrocarbon, Mineral, Ester |
Barium | 220 | 280 | 21(40℃), 4.5(100℃) |
0.99 | Light brown | -40 to +130 | Load-resistant, wear-resistant, water-resistant, and high speed, for spindles | |
| NB2 | Staburags NBU 12 | Mineral | Barium | 220 | 260 | 220(40℃), 19(100℃) |
0.99 | Light tan | -15 to +150 | Load-resistant, water-resistant, and chemical-resistant, for food machinery (NSF H2) | |
| NB3 | Staburags NBU 12/300 KP | Mineral | Barium | 220 | 300 | 225(40℃), 19(100℃) |
0.97 | Light tan | -20 to +130 | Load-resistant, water-resistant, and chemical-resistant | |
| IMI | Barrierta IMI | PFPE | PTFE | ― | 280 | 200(40℃)、22(100℃) | 1.95 | White | -45～+220 | High temperature, low torque, high speed, and supports electrical contact | |
| L55 | Barrierta L55/2 H1 | PFPE | PTFE | ― | 280 | 420(40℃), 40(100℃) |
1.96 | White | -40 to +260 | High temperature, oxidation-resistant, and chemical-resistant, for food machinery (NSF H1) | |
| E55 | Barrierta JFE 552 | PFPE | PTFE | ― | 280 | NKL apparent viscosity: S | 1.90 | White | -35 to +260 | High temperature, oxidation-resistant, and chemical-resistant | |
| UH6 | Klubersynth UH1 64-62 | Synthetic hydrocarbon, Ester | Silica | ― | 280 | 65(40℃), 10(100℃) |
0.92 | Light brown | -40 to +140 | Load-resistant, wear-resistant, and water-resistant, for food machinery (NSF H1) | |
| K24 | Krytox 240AC | Chemours | PFPE | PTFE | ― | 280 | 270(38℃), 26(99℃) |
1.93 | White | -34 to +288 | High temperature, oxidation-resistant, and chemical-resistant, for food machinery (NSF H1) |
| K2Z | Krytox 240AZ | PFPE | PTFE | ― | 280 | 24.7(38℃), 4.2(99℃) |
1.89 | White | -57 to +149 | Oxidation-resistant, chemical-resistant, for food machinery (NSF H1) | |
| MG2 | Mobilgrease 28 | ExxonMobil | PAO | Organog Clay | 307 | 293 | 29.3(40℃), 5.7(100℃) |
0.95 | Dark red | -54 to +177 | Wide temperature range, wear-resistant |
| B32 | Beacon 325J | Synthetic | Lithium | 194 | 262 | 11.54(40℃)、3.204(100℃) | 0.94 | Beige | -50 to +120 | Low temperature, low torque, low noise, and long life | |
| PEM | Polyrex EM (Polyree EM) | Mineral | Polyurea | 260 | 285 | 115(40℃), 12.2(100℃) |
0.88 | Blue | -20 to +180 | Low-noise, for electric motors | |
| CGA | RHEOLUBE 374C | Nye Lubricants | PAO | Lithium | 260 | 193 | 60.7(40℃), 9.5(100℃) |
0.87 | Yellow-brown | -40 to +150 | Wide temperature range, and high speed |
| AFF | AFF Grease | THK | Synthetic | Lithium | 220 | 315 | 100(40℃) | 0.98 | Tan | -40 to +120 | Anti-fretting and low-dust grease |
| NBF | NIGACE W (BF) | Nippon Grease | Mineral, Synthetic | Urea | 250 | 255 | ― | 0.88 | Light tan | -30 to +150 | Low noise and long life |
| RYC | ROYCO 22CF | LANXESS | PAO | Inorganic gel | 232 | 283 | ― | 0.88 | Dark brown | -54 to +177 | Wide temperature range, water-resistant and load-resistant |
Note: When you are planning to use a bearing filled with an NSF H1 or H2 registered lubricant for food machinery, please consult with us because an additional cleanliness management procedure will be required in the assembly process.