| Bearing no. | F6904 2RS |
|---|
| Bore diameter | d | 20 mm0.7874 inch |
|---|
| Outer diameter | D | 37 mm1.4567 inch |
|---|
| Inner ring width | B | 9 mm0.3543 inch |
|---|
| Outer ring width | C | 9 mm0.3543 inch |
|---|
| Inner ring chamfer dimension | rsi min | 0.3 mm0.0118 inch |
|---|
| Outer ring chamfer dimension | rse min | 0.3 mm0.0118 inch |
|---|
| Flange outer diameter | D1 | 40 mm1.5748 inch |
|---|
| Flange width | C1 | 2 mm0.0787 inch |
|---|
| Basic dynamic load rating | Cr | 6380 N |
|---|
| Basic static load rating | Cor | 3680 N |
|---|
| Limiting speed | Grease | 12000 min-1 |
|---|
| Oil | 12000 min-1 |
|---|
| Abutment and fillet dimensions | da min | 22 mm0.8661 inch |
|---|
| da max | 23.5 mm0.9252 inch |
|---|
| Da min | - mm- inch |
|---|
| Da max | mm inch |
|---|
| rasi max | 0.3 mm0.0118 inch |
|---|
| rase max | mm inch |
|---|
| Ball size × quantity | 4.762 mm0.1875 inch × 11 |
|---|
| Mass (reference) | 38.0 g |
|---|
The above values are subject to change without notice for the improvement of products or other purposes. We have prepared this table with sufficient care, and we cannot be held responsible for any damage caused by possible errors or omissions.
