| Bearing no. | F6901 2RS |
|---|
| Bore diameter | d | 12 mm0.4724 inch |
|---|
| Outer diameter | D | 24 mm0.9449 inch |
|---|
| Inner ring width | B | 6 mm0.2362 inch |
|---|
| Outer ring width | C | 6 mm0.2362 inch |
|---|
| Inner ring chamfer dimension | rsi min | 0.3 mm0.0118 inch |
|---|
| Outer ring chamfer dimension | rse min | 0.3 mm0.0118 inch |
|---|
| Flange outer diameter | D1 | 26.5 mm1.0433 inch |
|---|
| Flange width | C1 | 1.5 mm0.0591 inch |
|---|
| Basic dynamic load rating | Cr | 2890 N |
|---|
| Basic static load rating | Cor | 1460 N |
|---|
| Limiting speed | Grease | 18000 min-1 |
|---|
| Oil | 18000 min-1 |
|---|
| Abutment and fillet dimensions | da min | 14 mm0.5512 inch |
|---|
| da max | 15 mm0.5906 inch |
|---|
| Da min | - mm- inch |
|---|
| Da max | mm inch |
|---|
| rasi max | 0.3 mm0.0118 inch |
|---|
| rase max | mm inch |
|---|
| Ball size × quantity | 3.175 mm0.1250 inch × 10 |
|---|
| Mass (reference) | 11.6 g |
|---|
The above values are subject to change without notice for the improvement of products or other purposes. We have prepared this table with sufficient care, and we cannot be held responsible for any damage caused by possible errors or omissions.
