| Bearing no. | F63800 2RS |
|---|
| Bore diameter | d | 10 mm0.3937 inch |
|---|
| Outer diameter | D | 19 mm0.748 inch |
|---|
| Inner ring width | B | 7 mm0.2756 inch |
|---|
| Outer ring width | C | 7 mm0.2756 inch |
|---|
| Inner ring chamfer dimension | rsi min | 0.3 mm0.0118 inch |
|---|
| Outer ring chamfer dimension | rse min | 0.3 mm0.0118 inch |
|---|
| Flange outer diameter | D1 | 21 mm0.8268 inch |
|---|
| Flange width | C1 | 1.5 mm0.0591 inch |
|---|
| Basic dynamic load rating | Cr | 1720 N |
|---|
| Basic static load rating | Cor | 840 N |
|---|
| Limiting speed | Grease | 24000 min-1 |
|---|
| Oil | 24000 min-1 |
|---|
| Abutment and fillet dimensions | da min | 11.5 mm0.4528 inch |
|---|
| da max | 11.5 mm0.4528 inch |
|---|
| Da min | - mm- inch |
|---|
| Da max | mm inch |
|---|
| rasi max | 0.3 mm0.0118 inch |
|---|
| rase max | mm inch |
|---|
| Ball size × quantity | 2.381 mm0.0937 inch × 10 |
|---|
| Mass (reference) | 7.86 g |
|---|
The above values are subject to change without notice for the improvement of products or other purposes. We have prepared this table with sufficient care, and we cannot be held responsible for any damage caused by possible errors or omissions.
