| Bearing no. | F698HZZ |
|---|
| Bore diameter | d | 8 mm0.315 inch |
|---|
| Outer diameter | D | 19 mm0.748 inch |
|---|
| Inner ring width | B | 6 mm0.2362 inch |
|---|
| Outer ring width | C | 6 mm0.2362 inch |
|---|
| Inner ring chamfer dimension | rsi min | 0.3 mm0.0118 inch |
|---|
| Outer ring chamfer dimension | rse min | 0.3 mm0.0118 inch |
|---|
| Flange outer diameter | D1 | 22 mm0.8661 inch |
|---|
| Flange width | C1 | 1.5 mm0.0591 inch |
|---|
| Basic dynamic load rating | Cr | 1900 N |
|---|
| Basic static load rating | Cor | 729 N |
|---|
| Limiting speed | Grease | 37000 min-1 |
|---|
| Oil | 44000 min-1 |
|---|
| Abutment and fillet dimensions | da min | 9.7 mm0.3819 inch |
|---|
| da max | 9.7 mm0.3819 inch |
|---|
| Da min | mm inch |
|---|
| Da max | mm inch |
|---|
| rasi max | 0.3 mm0.0118 inch |
|---|
| rase max | mm inch |
|---|
| Ball size × quantity | 3.175 mm0.1250 inch × 7 |
|---|
| Mass (reference) | 7.76 g |
|---|
The above values are subject to change without notice for the improvement of products or other purposes. We have prepared this table with sufficient care, and we cannot be held responsible for any damage caused by possible errors or omissions.
