| Bearing no. | 68/0.6H |
|---|
| Bore diameter | d | 0.6 mm0.0236 inch |
|---|
| Outer diameter | D | 2.5 mm0.0984 inch |
|---|
| Inner ring width | B | 1 mm0.0394 inch |
|---|
| Outer ring width | C | 1 mm0.0394 inch |
|---|
| Inner ring chamfer dimension | rsi min | 0.05 mm0.002 inch |
|---|
| Outer ring chamfer dimension | rse min | 0.05 mm0.002 inch |
|---|
| Basic dynamic load rating | Cr | 50 N |
|---|
| Basic static load rating | Cor | 11 N |
|---|
| Limiting speed | Grease | 128000 min-1 |
|---|
| Oil | 152000 min-1 |
|---|
| Abutment and fillet dimensions | da min | 1 mm0.0394 inch |
|---|
| da max | 1.1 mm0.0433 inch |
|---|
| Da min | 2 mm0.0787 inch |
|---|
| Da max | 2.1 mm0.0827 inch |
|---|
| rasi max | 0.05 mm0.002 inch |
|---|
| rase max | 0.05 mm0.002 inch |
|---|
| Ball size × quantity | 0.500 mm0.0197 inch × 5 |
|---|
| Mass (reference) | 0.02 g |
|---|
The above values are subject to change without notice for the improvement of products or other purposes. We have prepared this table with sufficient care, and we cannot be held responsible for any damage caused by possible errors or omissions.
